WELDED WIRE MESH (WWM) AND WELDED WIRE FABRIC (WWF)
We offer a wide range of weld mesh, which possess high strength, rigidity and resistance to corrosion. These welds help in keeping the wires straight, uniform and distortion-free without risk of fraying. This is mainly used for fencing and concrete reinforcement.
Wire mesh is prefabricated to rectangular or square steel mesh consisting of series of parallel, longitudinal, cold-worked high-yield steel wires welded at regular intervals to transverse wires.
Wire mesh is manufactured on automatic welding machines, ensuring uniform spacing of wires and consistent cross-sectional areas.
The welding is accomplished by an electronically controlled electrical process employing the principle of fusion combined with pressure, which actually fuses the intersecting wires into homogeneous section without loss of strength. The welds in plain cold-worked
Wires contribute to the bonding and anchorage values in concrete.
Over Head Tanks
Fencing of any area
Concrete Road and Reinforcement
Industrial & commercial flooring
The wires used in the fabric are cold drawn from mild steel wire rods and are manufactured conforming to IS;432-PTII/ 1982
WWF is manufactured conforming to IS;1566/1982
WWM offers a convenient means to quickly partition/ barricade large areas with rigid fencing. It is also used as guard for trees, machines and electrical equipment.
WWM is an easier alternative to plates for industrial structural flooring. It provides for lighter material and ventilation across floors.
WELDED WIRE GABIONS;
Gabions are heavy duty rectangular wire mesh filled with rock or rubble to economically
And effectively construct earth retaining walls and erosion control structures
Welded steel fabric is used successfully and economically in practically every form of reinforcement concrete in buildings such as footing, slabs, walls, staircases, refuse chutes, beams, stirrup cages and columns.
Concrete pavements are exposed directly to atmospheric conditions, expanding and contracting with every change of temperature or moisture condition.
In factory shed flooring and concrete pavements/roads weight of the slab itself and the tendency of the ground to grip the concrete under surface, creates resistance to expansion or contraction and tend to produce relieving cracks in the concrete slab. WWF holds cracked sections tightly, permitting the transfer of the load maintaining the evenness of surface and safe guarding the strength and life of the pavement.
WWF FOR COATING BY GUNITING/RE-PLASTERING;
As a bonding fabric during Guniting (spraying of thick cement-sand slurry with compressed air) and re-plastering required for repairs and rehabilitation of structures. Guniting is also extensively used for coating of pipelines, to significantly enhance their life against corrosion.
The quality of construction work has improved significantly with the use of precast components.
Today, welded steel fabric is widely used in pre-cast components ranging from architectural facades, parapet walls, lightweight partition panels, sunshades, staircases, refuse,chutes, planks(slabs) to water tanks, secondary roofing, U-drain, box culverts etc.
WWF as concrete reinforcement is by far the most potential and most efficient application. The welds in plain cold-worked wires contribute to the bonding and anchorage values in concrete. The manufacturing process helps to facilitate onsite
Installation and off-site fabrication, yielding higher productivity, better quality buildings and safer, neater and conducive job-site conditions. In an environment of increased site-labour cost, WWF provides developers, designers, engineers and contractors a convenient and economical steel reinforcement for concrete structures.
INCREASED COST SAVINGS THROUGH HIGHER PRODUCTIVITY;
QUALITY STEEL FIXING;
The spacing of steel wires is uniformly controlled, eliminating human error in manual steel fixing.
IMPROVED WORK SAFETY;
There is no cutting and bending of bars on site. Hence, the delivered welded fabric can be neatly stacked in a small area near the structures in progress
Design and work drawings are quickly and easily prepared.
We believe in imparting total customer satisfaction. With a commitment to provide quality products, we also ensure for timely completion of the work. Our customer orientated services places us apart from our industrial competitors. We always innovate new concepts in our product range and services.
Shree Krishna International
Contact Person: Er. Ashish Garg
74, Karol Bagh
Ludhiana - 141001, Punjab, India